S8D25-12D

25W DC 12V DC MOTOR D-CUT Type

□ Specification Model Output (W) Vol (VDC) No Load At Rated Load Dimension Speed (rpm) Current (A) Speed (rpm) Current (A) Torque (Kgf.cm) A B Shaft spec S8D25-12□ 25 12 3100 1.4 2600 3.8 0.8 – – D-CUT Stand Others Spec separately Inquiry S8D25-24□ 24 0.7 1.7 S8D25-90□ 90 0.2 0.5 S8D40-12□ 40 12 2.5 7.4 1.3 S8D40-24□ 24 0.8 2.5 S8D40-90□ 90 0.3 0.7 * The code in □ of gearhead model “A” is for used gear spec, in case of “D” is for D-CUT. * Above dimension in “( )”marked means gear ratio 1:20 over. * According to the demand, developing is possilbe after selecting voltage spec. 1800~5300rpm is possible to develop. * If voltage is higher, motor efficiency rate and torque will increase and we can provide DC 220V max.   □ Geared Motor Specification ■ 25W Model Ratio 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 25W rpm 1000 833 600 500 400 333 300 240 200 166 150 120 100 83 Kgf.cm 1.9 2.3 3.2 3.9 4.9 5.8 6.5 8.1 9.7 11.7 12.2 14.6 17.5 21.0 Model Ratio 40 50 60 75 90 100 120 150 180 200 250 300 360 400 25W rpm 75 60 50 40 33 30 25 20 16 15 12 10 8.3 7.5 Kgf.cm 23.3 26.2 31.5 39.4 47.2 52.5 63.0 78.7 80.0 80.0 ■ 40W Model Ratio 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 40W rpm 1000 833 600 500 400 333 300 240 200 166 150 120 100 83 Kgf.cm 3.2 3.8 5.3 6.3 7.9 9.5 10.5 13.2 15.8 19.0 19.7 23.7 28.4 34.1 Model Ratio 40 50 60 75 90 100 120 150 180 200 250 300 360 400 40W rpm 75 60 50 40 33 30 25 20 160 15 12 10 8.3 7.5 Kgf.cm 37.9 42.6 51.2 64.0 76.8 80.0 80.0 * Except for above standard, the development of special model is possible according to the demand, 1 LOT can be made up when 50sets over. * As above data is made regardless of gear head efficiency rate, actual application data value will less than some parts of it. * Above some torques with same value from regular gear ratio as considering external resistance which can be represented in the gear head, actual data will greater proportional to gear ratio. * As displayed value is for no-load, it could be different according to the load. * ■ color gear ratio indicates motor rotation in the same direction, others indicate motor rotation in the opposite direction. * □ Color is ratio using Gear Head and Inter-Decimal Gear Head(inter-decimal 1:10) together, permissible torque is same as maximum data from each output. * 25W~40W Gear Type is not marked ‘L’ code for it is non-heat treatment.

□ Dimensions

□ Schematic Diagrams Caution : Change the direction of motor rotation only after the motor stops completely. If an attempt is made to change the direction of rotation while the motor is running, the motor may change it’s direction of rotation after some delay.   It is applied to all of direct current method DC MOTOR in common

S6D06-12A, S6D06-12D, S6D06-24A, S6D06-24D, S6D06-90A, S6D06-90D,S6D10-12A, S6D10-12D, S6D10-24A, S6D10-24D, S6D10-90A, S6D10-90D, S6D15-12A, S6D1-12D, S6D15-24A, S6D15-24D, S6D15-90A, S6D15-24D,
S8D25-12A, S8D25-12D, S8D25-24A, S8D25-24D, S8D25-90A, S8D25-90D, S8D40-12A, S8D40-12D, S8D40-24A, S8D40-24D, S8D40-90A, S8D40-90D, S9D60-12BH, S9D60-12CH, S9D60-12D, S9D60-24BH, S9D60-60CH,
S9D60-24D, S9D60-12K, S9D60-24K, S9D60-90BH, S9D60-90CH, S9D60-90K, S9D90-12CH, S9D90-12D, S9D90-12K, S9D90-24CH, S9D90-24D, S9D90-24K, S9D90-90-90CH, S9D90-90D, S9D90-90KS9, D120-12CH, S9D120-12D,
S9D120-12K, S9D150-12CH, S9D15-12D, S9D150-12K, S9D150-24CH, S9D150-24D, S9D150-24K, S9D200-12CH, S9D200-12D, S9D200-12K, S9D200-24CH, S9D200-24D, S9D200-24K, S9D200-90CH, S9D200-90D, S9D200-90K,
S9D300-12CH, S9D300-12HH, S9D300-12D, S9D300-12K, S9D300-24CH, S9D300-24HH, S9D300-24D, S9D300-24K, S9D300-90CH, C9D300-90HH, S9D300-90D, S9D300-90K